Newly designed top frame provides a flexible “blank slate” for automotive engineers to design their own driver interface structure and quickly switch hardware according to their testing needs.

 

Cruden, the world’s leading designer, manufacturer and integrator of professional open architecture driving simulators has redesigned its simulator top frame to allow automotive engineers to design and modify their own driver interface structure and make hardware changes themselves. This is in response to evolving applications for driving simulators where there are rapidly changing requirements for layout and components, such as the testing of advanced driver assistance systems (ADAS) and autonomous vehicles (AV).

 

New multi-function simulator design addresses ADAS, AV and HMI simulator hardware needs

12/07/2016                                  

 

 

 

© Henrik Sandsjö

 

                               

 

 

Back

The new, stiffer and stronger frame preserves the driver’s recessed position within the motion base while maximizing the functional workspace. The seating position provides easier access, lower overall height and more motion realism than a car mock-up mounted on top of the motion base, although this option can still be pursued as per the customer’s preference. 

 

The new sub-frame can be used with an off-board screen and projectors or with 3 x 42” Cruden vibration isolated on-board screens. It offers easier driver entry, without the need for a moving access bridge due to the off-set parking position of the motion base. Engineers can switch between entirely different car frames and components themselves. The new simulator design complies with all necessary directives and regulations and has CE marking. 

 

The frame has pre-defined (or custom) mounting interfaces that allow for customers to bolt on specific interior parts such as seats, steering wheels, pedals and partial dashboards, or even A pillars and three-point seatbelts, while maintaining overall structural integrity.

 

Maarten van Donselaar, CEO of Cruden says, “The pace at which automotive OEMs and suppliers need to develop ADAS and highly innovative HMI and entertainment systems has resulted in a new playing field for driving simulators. We want to give our customers the total freedom to design their own simulator from the top frame up. Of course, if the customer prefers, Cruden can design and supply all the driver interface equipment, based on our experience from many years of collaboration with automotive OEMs. Designed as a departmental engineering tool for OEMs and suppliers, our new, compact A406 and A646 series of automotive simulators build on and supersede the previous design of which more than 50 units have been installed since 2005.” 

1086 XP Amsterdam

The Netherlands

 

 

+31 20 707 4668 

+1 248 250 3332
 

Cruden China

211 Yongcui Road, #2-1503

Chengdu, 610041, China

 

+86 13980621758

 

SAMWOO Co., Ltd

423-798 #519, Ace Gwangmyeong Tower, 108, Haan-ro, Gwangmyeong-si

Gyeonggi-do, Korea

 

+82 2 6112 8420